EVR Firmware Version Change Log¶
FW Version |
Date |
Changes |
Affected HW |
|---|---|---|---|
0200 |
11.06.2015 |
- Prototype release |
VME-EVR-300 |
0201 |
24.09.2015 |
- Added segmented data buffer block status flags |
|
- Changed delay compensation FIFO depth from 2k to 4k event cycles |
|||
- Added DCM modulation to improve jitter performance |
|||
0203 |
12.01.2016 |
- Delay compensation amendments, non-GTX outputs are compensated properly |
VME-EVR-300 |
0204 |
25.01.2016 |
- First release for PCIe-EVR-300DC |
all |
- Fixed segmented data buffer flag writes |
|||
0204 |
03.02.2016 |
- Fixed initial values of GTX outputs |
VME-EVR-300 |
- GTX output aligment |
|||
0205 |
07.04.2016 |
- Changed PCIe-EVR-300DC class code to 0x118000. |
all |
- Moved delay compensation data from first segment to last segment. |
|||
- Fixed dual output mapping for transition board outputs. |
|||
- Added backplane signals to mTCA-EVR. |
|||
- Added delay compensation disabled mode to be able to use DC capable EVRs with pre-DC EVG and fan-outs. |
|||
0206 |
12.08.2016 |
- Relocated segmented data buffer to new address location. |
all |
- Replaced earlier data buffer in its original position (maintaining compatibility with 230 series protocol). |
|||
- Changed segmented data buffer protocol to use K28.2 as a start symbol |
|||
0207 |
30.08.2016 |
- Added stand-alone capability: using its internal reference |
all |
the EVR can now operate as a stand-alone pulse generator without event link. |
|||
- EVR can operate as a simple EVG by forwarding internal events |
|||
- Added software event capability |
|||
- Added one EVG type sequencer |
|||
030207 |
23.12.2016 |
- Changed beacon event code from 0x7a to 0x7e. |
all |
- Added status bits for delay compensation path delay value validity. |
|||
- Added register for topology ID. |
|||
040207 |
09.1.2017 |
- Repaired “trigger allways” problem with triggering sequencer with pulse generator 19. |
all |
- Added mapping 61 for sequencer software triggering. |
|||
050207 |
19.1.2017 |
- Fixed running on internal reference for VME-EVR-300.VME-EVR-300 |
|
060207 |
9.2.2017 |
- Added configurability to handling a lost event clock: |
VME-EVR-300 |
continue, stop, fallback to reference clock. |
|||
- Further fix to running on internal reference for VME-EVR-300. |
|||
070207 |
6.4.2017 |
- Fixed CML/GTX operation in stand-alone mode without receiver event stream. |
mTCA-EVR-300 |
- Fixed mapping of TCLKA/TCLKB backplane clocks on mTCA-EVR-300. |
|||
080207 |
7.8.2017 |
- PCIe AXI to OPB bridge fix for overloapping read/write |
PCIe-EVR-300DC |
operation during block transfers. |
|||
- Added pullup to MODU_SDA and MODU_DEF0. |
|||
090207 |
27.2.2018 |
- Changes to get design built on Vivado 2017.4 |
All |
0A0207 |
18.9.2018 |
- Changed number of external inputs to 16. |
PCIe-EVR-300DC |
0D0207 |
20.5.2019 |
- Added programmable phase shift to prescalers. |
mTCA-EVR-300 |
0E0207 |
2.7.2019 |
- Fix to event FIFO. |
mTCA-EVR-300 |
- Added flip-flop outputs. |